When working with professional chainsaw, it is found that the effect of pruning is not as good as before, then it is necessary to adjust the electric professional chainsaw blade, how to adjust it? The following professional chainsaw technicians show you how to adjust:

The blade of the electric professional chainsaw is fixed by nuts and screws. When fixing the blade, loosen the nut first, and then turn the bolt clockwise until it does not move. Note that you need to turn the screw up half a week. To ensure a good fastening, you must use a screwdriver. After the blade has been adjusted by bolts and nuts, it needs to be lubricated again to make it smooth.

If the blade is found to be dull and the electric professional chainsaw is not running smoothly, the blade needs to be polished, and the grinding of the blade surface or joint should be avoided when polishing.

When sanding the electric professional chainsaw blade, hold the sander at 45 degrees and sharpen the knife with the sanding edge.

When replacing a professional chainsaw blade, turn off the power to prevent injury caused by automatic start. When replacing a professional Chainsaw blade, wear gloves to take protective measures. Its specific practices are:

Remove the old blade, fix the cutter by hand, loosen the blade nut, remove the bolt and blade, and remove all the bolts and nuts at the same time when removing the old blade. Install the new blade and tighten the nut. If there are weeds on the blade, keep it clean.

If you do not know the model and size of the professional chainsaw blade to be replaced, consult the manufacturer. The above is the adjustment method of the electric professional chainsaw blade. When using the blade in daily life, we must ensure that the blade is sharp and tight.

professional chainsaw https://www.keylead.cn/Chain-Saw